Riding the Ebike Wave to the Beach
You wake up, excited about the anticipation of an early morning surf. You take that last sip of coffee and set off on your electric cargo bike, surfboard strapped to the side. It’s never been so fun -- and efficient -- to get to the coast.
After scanning the horizon, you realise it’s completely flat -- no waves as far as the eye can see. But this isn't your first rodeo. You know that a few kilometers down the coast is another surf spot, and it's only accessible by foot or bike.
Be it dawn patrol, accessing a new area, or having an everyday sandy adventure, there is no better way to get around the beach than by ebike. Sand increases resistance, and in turn, the amount of power needed to move. While riding in sand makes for a great workout, electric bikes with pedal assistance make beach riding all the more practical.
But preparation is key. Sand and salt are not generally kind to metallic and electrical components, and pristine beaches can spell treachery for the rider -- and devastation for your ebike -- if you don't know what you're getting into.
With proper knowledge, maintenance, and care, you can avoid disaster.
Here are some pro tips from our resident experts to keep in mind when riding on the beach:
1. After every ride, inspect your bike for salt water or sand, and remove any sand buildup with a damp or dry rag. Avoid cleaning your ebike with a hose or pressure washer, as direct water pressure can damage certain electrical components. Using direct water pressure with sand and salt can also spread those particles to other areas as well. Never ride in standing salt water or brackish water because, you know, back spray, man!
2. Keep your chain lubricated, but don't lubricate it right before a sandy or salty ride. Instead, after your ride, clean the chain off and apply a chain lubricant and let it settle for about two hours before going back into the sand. We recommend a Teflon lubricant, as it will apply wet then dry over time. A wet chain will attract unwanted sand and salt buildup.
3. When it comes to lubrication, it is also important to lubricate the sprockets. It may be easier to put the lube on a cloth and the cloth on the sprockets as you turn the pedals. Also lubricate the the nipples of the spokes on your wheels in a similar fashion.
4. Keep extra tires and tubes on you, as sand and salt can wear these down more quickly than other terrain, and there can often be sharp objects in the sand like shells and glass, which can easily puncture a tire.
5. When riding on the beach, it can be helpful to lower your tire pressure to help make maneuvering through sand easier. Make sure to bring the PSI back up to at or near 20 (assuming a fat tire bike) before you get back on a hard surface, as low tire pressure on pavement will increase the likelihood of a pinch flat.
6. If you ride sand often, you will need to maintain your bike more regularly. If you normally have your bike serviced twice a year, double down -- at least. It is also recommended that you do a drivetrain cleaning when you do a tune-up. This entails taking the components of the drivetrain apart to remove any unwanted sand. This should be done by professionals who are familiar with electric bike components.
7. Make sure to check your headset bearings often, as sand can sneak into tight areas. Bottom bracket maintenance, including cleaning, removing, and greasing the threads and inner bottom bracket shell is recommended.
8. All your components will go through added wear and stress when exposed to sand and salt. Keep a closer eye on all moving parts and replace them when they're showing signs of wear. For instance, particles like sand, dirt, and salt will increase the likelihood of chain stretch (which can damage the freewheel and cogs), so replacing your chain is a good idea.